Figure 59 headlamp assembly
HEADLAMP
The low beam and position lamps are lit whenever the
ignition key is turned on. All bulbs are lit when the
Low
high beam switch is activated or when passing lamp
Beam
switch is pressed.
See an EBR dealer or service manual for bulb replace-
ment.
Never touch the quartz bulb. Fingerprints will etch
the glass and decrease the bulb life. Grab the bulb
with paper or a clean, dry cloth. Failure to do so
could result in bulb damage.
Handle bulb carefully and wear eye protection. Bulb
contains gas under pressure, which, if not handled
carefully, could cause serious eye injury.
High
Beam
141