Engine Oil Change; Drain Oil - EBR 1190RS 2013 Owner's Manual

ENGINE OIL CHANGE

Do not switch lubricant brands indiscriminately be-
cause some lubricants interact chemically when
mixed. Use of inferior lubricants can damage the en-
gine.
Be sure that no lubricants or fluids get on tires,
wheels, or brakes when changing fluid. Traction can
be adversely affected, which could result in loss of
control of the motorcycle and death or serious inju-
ry.
NOTE
The engine oil also lubricates the clutch and transmis-
sion
1. Place a suitable container under the motorcycle.
2. See figure 44. Unscrew and remove fill plug from
oil fill hole. Replace o-ring if torn or damaged.
3. See Figure 47. Remove the left engine oil drain plug
located in the crank case. Wipe any accumulated
debris from magnetic tip on drain plug and replace
the aluminum washer.
110
4. See Figure 48. Remove the right oil drain plug
located under the clutch cover. Wipe any accu-
mulated debris from plug and replace the alu-
minum washer.
5. After all oil has drained, tilt vehicle to the right
side to drain any remaining oil from the right
side of the engine.