EBR 1190RS 2013 Owner's Manual page 122

Checking and Adding Coolant in
Expansion Tank
1. See Rider Seat Removal.
2. View the expansion tank. The fluid level should be
in the middle of the tank when the bike is cold.
3. To add coolant, unscrew the cap on the plastic ex-
pansion tank and fill to the midpoint of the tank.
Coolant mixture contains toxic chemicals, which may
be fatal if swallowed. If swallowed, do not induce
vomiting; call a physician immediately. Use in a well
ventilated area. Irritation to skin or eyes can occur
from vapors or direct contact. In case of skin or eye
contact, flush thoroughly with water and go to the
hospital, if necessary. Dispose of used coolant accord-
ing to federal, state and local regulations.
122
Do not remove the radiator filler cap when the en-
gine is hot. The cooling system is under pressure and
hot coolant and steam can escape, which could cause
severe burns. Allow engine to cool before servicing
At operating temperature, the radiator and oil cooler
contain hot fluids. Contact with the radiator or oil
cooler can result in minor or moderate burns.