Adjusting Foot Controls - EBR 1190RS 2013 Owner's Manual

ADJUSTING FOOT CONTROLS

The gear shift and rear brake toe pegs can be adjust-
ed for rider preference.
1. See Figure 26. Loosen the fastener from the toe
peg.
1. 2. Slide toe peg to the desired position. Adjust
the peg angle as needed.
3. Tighten the fastener to 48-72 in-lbs (5.4-8.1 Nm).
NOTE
To adjust the rear brake master cylinder pushrod,
see an EBR Dealer.
68
Adjustment
bolt
Figure 26