Menu Button; Button - EBR 1190RS 2013 Owner's Manual

Menu Button

The MENU button is used to configure the information
shown on the instrument cluster. With the engine run-
ning, press the "MENU" button to scroll through the
following screens::
 Backlight ON/OFF
 12/24 hour clock setting
 Clear Service Counter
 Units - F/C/Miles/KPH/Imperial
 Diagnostics—Historic codes plus live data

Clear Lap Data
See Figure 6. Press the "MENU" button to scroll
through the list of screens. Then press the ">>" button to
find the setting you prefer. Store the selection by press-
ing the "MEM" button.
56
>> Button
The ">>" button is used to select the information being
displayed on the bottom row of the LCD screen. With the
engine running, press the ">>" button to scroll through
the following screens:

Trip 1

Trip 2
 Miles to Service
 Lap Mode
 Low Fuel Trip
(If low fuel condition exists)

Warning Message (If Warning Message exists)
See Figure 6. Press the ">>" button to scroll to the information
you want to display. The selected display will resume after a key
off/key on cycle.