Clutch Hand Lever; Horn Switch; Headlamp High/Low Beam Switch; Passing Lamp Switch - EBR 1190RS 2013 Owner's Manual

Clutch Hand Lever

Do not position fingers between the hand control lev-
er and the handlebar grip. Improper hand position-
ing can impair control lever operation and cause loss
of vehicle control, which could result in death or seri-
ous injury.
See Figure 4. the clutch
handlebar and is operated with the fingers of the left
hand.
1. Slowly pull clutch hand lever in against the handle-
bar grip to fully disengage the clutch.
2. Shift to first gear using the gear shift lever. See
CONTROLS AND INDICATORS, Gear Shift Lev-
er.
3. Slowly release the clutch hand lever to engage
clutch.

Horn Switch

See Figure 4. The horn is operated by pushing on the
horn switch located on the left hand controls.
53
hand lever is located on the left

Headlamp High/Low Beam Switch

The headlamp high/low beam switch is located on the
left hand controls. The switch has two positions to acti-
vate the headlamps high or low beams.
- See Figure 4. Press the top of the headlamp high/low
beam switch to activate the high beam.
- Press the bottom of the headlamp high/low beam
switch to return to low beam.
See Figure 6. The (blue) high beam indicator lamp will
illuminate when the high beam is on.

Passing Lamp Switch

See Figure 4. The passing lamp switch is located on the
front of the left hand controls. Pressing the switch when
the headlamp dimmer switch is set to low beam will mo-
mentarily flash the high beam headlamp.