Stopping The Engine - EBR 1190RS 2013 Owner's Manual

NOTE
The electronic fuel injection system compensates for
all outside and engine temperatures for positive
starts.
1. See figure 30. Turn engine OFF/RUN switch to
RUN.
2. Be sure the throttle is closed.
3. Raise the sidestand.
4. Turn ignition/headlamp key switch to ON.
5. Verify transmission is in NEUTRAL position by
observing lit green neutral indicator lamp on dash
panel, and verify neutral position by rolling mo-
torcycle forward and rearward.
6. Press electric starter switch to operate starter.
7. Release electric starter switch when engine starts.
NOTE
The motorcycle will have a reduced RPM range until
the engine is warmed up.
If you read this section and still have questions about
the correct operation of your motorcycle, talk to an
authorized EBR dealer for assistance.
79

STOPPING THE ENGINE

Turn engine OFF/RUN switch to
OFF.
Figure 30
RUN
OFF
Starter
Switch