Engine Over Temperature Lamp - EBR 1190RS 2013 Owner's Manual

If the lamp remains continuously lit after the initial diagnostics,
begins flashing, or turns on at a later time, see a EBR dealer.
This indicates an event has occurred related to the proper opera-
tion of the engine management system.

Engine Over Temperature Lamp

See Figure 6. The amber Check Engine lamp illuminates when
the coolant temperature is above the normal operating range.
When a temperature condition exists, the coolant temperature
also flashes on the LCD screen. EBR 1190RS coolant level:
Check the coolant level. If the level is adequate and temperature
condition persists, see a EBR dealer for service.
Oil Pressure Lamp
See Figure 6. The red oil pressure lamp illuminates when oil is
not circulating at the proper pressure through the engine.
The oil pressure lamp will illuminate briefly when the ignition
is turned on prior to starting engine. Conditions that could cause
the red oil pressure indicator lamp to illuminate during operation
include:
• Incorrect oil level or diluted oil.
• Oil line clogged with ice and sludge, preventing oil circulation
(in freezing weather).
61
NOTE
• Grounded oil pressure switch wire.
• Faulty oil pressure switch.
• Damaged or improperly operating bypass valve.
• Improper oil pump operation.
If the oil pressure indicator lamp remains lit, always check
the oil supply first. If the oil supply is normal and the lamp
is still lit, stop the engine at once and do not ride further
until the trouble is located and the necessary repairs are
made. Failure to do so may result in engine damage.
If the oil pressure lamp illuminates during operation:
• Stop the engine immediately and check the oil level.
• Add recommended oil as required until proper level is
achieved. If the oil pressure indicator lamp illuminates
during operation despite proper oil level:
• Stop the engine immediately and do not ride further
until the necessary repairs are made. See a EBR dealer.