Headlamp Adjustment - EBR 1190RS 2013 Owner's Manual

NOTE
As the weight of the rider will compress the suspension
slightly, have a person whose weight is approximately the
same as that of the principal rider sit on the motorcycle.
7. See Figure 60. Verify headlamp alignment. Turn the
ignition switch to IGNITION and set the headlamp
switch to HIGH beam.
A. The center of the hot spot (brightest area of light
beam) should be centered where the two lines inter-
sect.
B. Adjust headlamp alignment if necessary.

HEADLAMP ADJUSTMENT

Horizontal Adjustment
Horizontal adjusters are located behind the fairing/
headlamp assembly. If horizontal adjustment (left or right)
is required, locate adjuster screw on right side of bike be-
hind fairing.
• To move beam to the right, turn adjuster clockwise.
• To move beam to the left, turn adjuster counter clock-
wise.
144
Figure 61:Right Side
Adjusters