Lap Timer - EBR 1190RS 2013 Owner's Manual

• The fuel consumption calculations are not displayed
until 6 mi (10 km) have been traveled after a reset.
• Depending on the unit settings, the fuel consumption is
displayed as miles per gallon (mpg), miles per gallon
Lap Timer Operation
The lap timer requires a motorcycle mounted receiver and
a trackside beacon. These are sold separately.
1. Activate by scrolling to the Lap Time mode by press-
ing the " >>" button
2. Review all lap time info by pressing OK/MEM button
3. When the dash detects a lap signal with the receiver
from a beacon, it will automatically switch and show
lap time. The lap time will be shown for 10 seconds
and then switch to show lap time running of current
new lap.
63
NOTES