Low Battery Voltage Lamp - EBR 1190RS 2013 Owner's Manual

Low Battery Voltage Lamp

The red low battery voltage lamp illuminates when the bat-
tery voltage falls below 11.5 V. When a battery condition
exists, a SYSTEM VOLTAGE message is displayed on the
LCD screen. If the lamp remains lit or turns on after the ini-
tial diagnostics, check the battery voltage and charge the bat-
tery if necessary. See MAINTENANCE AND LUBRICA-
TION, Battery: EBR 1190RS.
See an EBR dealer if problems with the charging system are
suspected.
INITIALIZATION SEQUENCE
During typical vehicle startup, the instrument cluster will go
through the following initialization sequence.
1. Rider turns key to ON position.
2. The instrument cluster performs self diagnostics and bulb
check. The indicator lamps and warning lamps illuminate
briefly.
3. The LCD screen displays the digital speedometer, clock,
odometer (in its last selected mode), and introductory text
message.
4. Rider starts engine.
5. If any errors are detected when starting the vehicle, an
error message is displayed on the LCD screen.
62
6. If regular service is due, the LCD screen briefly displays
SERVICE XXX (with the remaining distance until service
due) or SERVICE NOW.
7. The LCD screen flashes CT COLD until engine is warm.
8. When engine is at normal operating temperature, the gear
indicator is displayed.
9. Coolant temperature, battery voltage, and
average/instantaneous fuel consumption information can
be selected.