Table of Contents
Advertisement
Quick Links
For more information on this and other
Winmate products, please visit our
website at:
www.winmate.com
Document Part Number: 91521110100N
Please read these instructions carefully before using this product, and save this manual for future use
Flat Stainless P-CAP
Quick Start Guide
Model No.:
Full IP65
Display
V1.0
R10L100-SPT2
R15L100-SPC3
R17L100-SPA1
R19L100-SPM1
W22L100-SPA3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Winmate R10L100-SPT2
Summary of Contents for Winmate R10L100-SPT2
-
Page 1: Quick Start Guide
Full IP65 Flat Stainless P-CAP Display Quick Start Guide V1.0 For more information on this and other Winmate products, please visit our website at: www.winmate.com Model No.: R10L100-SPT2 R15L100-SPC3 R17L100-SPA1 R19L100-SPM1 W22L100-SPA3 Document Part Number: 91521110100N Please read these instructions carefully before using this product, and save this manual for future use... -
Page 2: Fcc Statement
FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "B"... - Page 3 Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer Winmate Inc. reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability...
- Page 4 Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You may need the following information ready before you call: ...
-
Page 5: Table Of Contents
Contents INTRODUCTION Features Package Contents Product Overview Dimensions 10.4" Dimensions 15" Dimensions 17” Dimensions 19” Dimensions 21.5” Physical Buttons and LED Indicators Connectors GETTING STARTED Turning On Your Device Turning Off Your Device INSTALLATION Wiring Requirements Connector Pin Assignments Power Cable USB Cable (For Touch) VGA Cable DVI Cable (Optional) -
Page 6: Introduction
Projected Capacitive Multi-Touch (P-CAP) screen supports glove mode and provides even more convenience for the operator. Winmate® IP65 Flat Stainless P-CAP Display goes beyond that of the standard industrial panel computers with elegant, edge-to-edge design, rugged construction, powerful performance, and flexible mounting options. -
Page 7: Package Contents
Package Contents Carefully remove the box and unpack your device. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately. Standard factory shipment list may include the following items: Quick Start Guide R-series AD Board Display... -
Page 8: Product Overview
Product Overview This section contains mechanical drawing of the Display. Notice that this is a simplified drawing and some components are not marked in detail. Dimensions 10.4" Unit: mm Dimensions 15" Unit: mm Dimensions 17”... -
Page 9: Dimensions 19
Unit: mm Dimensions 19” Unit: mm... -
Page 10: Dimensions 21.5
Dimensions 21.5” Unit: mm... -
Page 11: Physical Buttons And Led Indicators
Physical Buttons and LED Indicators Physical buttons and LED indicators located on the rear side of the Display. Physical Buttons Icon Button Description DOWN/ Press to decrease the volume or volume VOLUME down when without OSD menu DOWN UP/ VOLUME Press to increase the value or volume up when without OSD menu Press to exit the menu or auto adjustment... - Page 12 LED Indicators LED Type Status Description Power is on Power is off System is in standby mode System is idle...
-
Page 13: Connectors
Connectors IP65 Flat Stainless P-CAP Display has IP65 type connectors with protection cap. IMPORTANT: To maintain the IP65 rating of the full unit it is recommended to use only IP65 waterproof cables. You must remember to firmly close all protective caps when connector is not used. -
Page 14: Getting Started
GETTING STARTED Turning On Your Device Follow the following steps to turn on your device: 1. Connect the AC adapter (12V/50W) to the DC power connector located on the back side of the display. 2. Connect the power cord to AC adapter. 3. -
Page 15: Turning Off Your Device
Turning Off Your Device To shut down your device, do the following: 1. Disconnect the power cord and the device will automatically turn off. -
Page 16: Installation
INSTALLATION Wiring Requirements The following common safety precautions should be observed before installing any electronic device: Strive to use separate, non-intersecting paths to route power and networking wires. If power wiring and device wiring paths must cross make sure the wires are perpendicular at the intersection point. ... -
Page 17: Connector Pin Assignments
Connector Pin Assignments This Display is equipped with four connectors which are IP65 level and fool- proofing design. Use only the cables that are included in the package. The pin assignments of the cables are as follows. Power Cable The Flat Stainless P-CAP Display has IP65 power connector. Use power cable to connect the display to the source of power. -
Page 18: Usb Cable (For Touch)
USB Cable (For Touch) The Flat Stainless P-CAP Display has IP65 USB connector for touch. Use USB cable to connect touch. -
Page 19: Vga Cable
VGA Cable The Flat Stainless P-CAP Display has IP65 VGA connector. Use VGA cable to connect the display to other external devices. -
Page 20: Dvi Cable (Optional)
DVI Cable (Optional) The Flat Stainless P-CAP Display has optional IP65 DVI connector. Use DVI cable to connect the Display to other external device. -
Page 21: Mounting
VESA Mounting The Display has VESA mount holes on the rear side. Follow instructions below to mount the unit with VESA Mount bracket (not supplied by Winmate). Size VESA Plate Screw Hole... -
Page 22: Yoke Mounting
Yoke Mounting Yoke Mount solution allows installing the Display with the bracket (not supplied by Winmate). Mounting instruction: 1. Place the Display on the bracket stand, aiming screw holes for each other. 2. Secure screws to fix the device upon the bracket stand. -
Page 23: Specifications
SPECIFICATIONS Hardware Specifications Model Name R10L100- R15L100- R17L100- R19L100- W22L100- SPT2 SPC3 SPA1 SPM1 SPA3 Display 10.4” 15” 17” 19” 21.5” Size Resolution 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 1920 x 1080 Brightness (typ.) (typ.) (typ.) (typ.) - Page 24 Power Specifications Power Input 12V DC, with External AC to DC Adapter (100~240V AC) Power VESA DPMS Compliant Management Plug & Play VESA DDC 1/2B Power 26W (typ.) 30W (typ.) 31W (typ.) 36W (typ.) 50W (typ.) Consumption Standards and Certification Certification CE, FCC, RoHs...
-
Page 25: Appendix A: Cleaning The Monitor
APPENDIX A: CLEANING THE MONITOR Before cleaning: Make sure the device is turned off. Disconnect the power cable from any AC outlet. When cleaning: Never spray or pour any liquid directly on the screen or case. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. -
Page 26: Appendix B: Available Input Signals
APPENDIX B: AVAILABLE INPUT SIGNALS For information about available input signals, please refer to R-Series AD Board Manual included in the package. You can also download R - Series AD Board Manual from Winmate Download Center. Follow the link below: http://dc.winmate.com.tw/_downloadCenter/2009/Lcd/Display%20RSeries%20U... - Page 27 NOTES ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________ ________________________________________________________________...
- Page 28 Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Email: sales@winmate.com.tw Official website: www.winmate.com...
Need help?
Do you have a question about the R10L100-SPT2 and is the answer not in the manual?
Questions and answers