Led Indicator - GiBiDi TAIMEN T6 Instructions For Installation Manual

22
UK

LED INDICATOR

The LED ( Fig.9-4) provides operator status informations.
LED STATUS
GLOW SOLID
SLOW BLINK
RAPID BLINK
INTERMITTENT BLINK
PHOTOCELLS
The Opener will commence to safety reverse when the photocells become momentarily or permanently interrupted
during a closing movement.
Photocells intervention will reduce auto closing pause time to 5 seconds.
Photocells override:
Press and hold the Run Button (Fig.9-3) until the operator has reached the fully closed position.
Ÿ
WICKET DOOR SWITCH
In order to render the operator inoperative, whenever the wicket door is open, connect as per Fig.12 .
OVERHEAD DOOR
The curved arm accessory is required in order to properly install this operator on overhead doors.
INSTALLATION COMPLIANCE WITH THE REGULATION
When an existing door / gate is automated it becomes a machine, the installer becomes the builder, He is
responsible for the safety of the automated device and has to comply with the provisions provided by the 2006/42/CE
Directive . To make easier the certification process, GI.BI.DI. put at your disposal on its website WWW.GIBIDI.COM
some guides and replies to more frequent questions.
The operator has reached close limit position.
The operator has reached open limit position.
The operator is learning new force values.
Sleep mode.
INDICATION
TAIMEN