GiBiDi TAIMEN T6 Instructions For Installation Manual page 18

18
UK
TRANSMITTERS LEARNING - AUTOMATIC MODE ( DIP5=ON)
In this mode all transmitter buttons will be learned with the following functions:
Ÿ Button 1 :
"START WITH AUTOMATIC CLOSING"
Ÿ
Button 2 : "START WITHOUT AUTOMATIC CLOSING"
Ÿ
Button 3 : "COURTESY LIGHT ON/OFF"
Ÿ
Tasto 4 : "Holiday Lock-out Mode"
During Holiday Lock-out Mode all functionality is disabled and the operator will only function upon receiving a signal
from a pre-learned transmitter.
Learning procedure:
Ÿ Press and release LEARN button (Fig.9-1).
Courtesy light will flash.
Ÿ
Press and hold for three seconds the transmitter button to assign the funcion to.
Ÿ
Courtesy light will flash rapidly and them it will extinguish.
Ÿ
Learn completed.
Ÿ
TRANSMITTERS LEARNING - CUSTOM MODE ( DIP5=OFF)
With this mode it's possible to assign the function
choice.
Button learning procedure:
Ÿ Press and release LEARN button (Fig.9-1).
Courtesy light will flash.
Ÿ
Press and hold for three seconds the transmitter button to assign the funcion to.
Ÿ
Courtesy light will flash rapidly and them it will extinguish.
Ÿ
Learn completed.
Ÿ
Operation in reply to a START command:
→
Ÿ Door closed
→
Ÿ During opening
→
Ÿ Door opened
→
Ÿ During closing
Automatic closing will be active if DIP3=ON
Operation in reply to a START command:
→
Ÿ Door closed
→
Ÿ During opening
→
Ÿ Door opened
→
Ÿ During closing
Automatic closing is never active.
Operation in reply to a START command:
→
Ÿ Button press
COURTESY LIGHT ON
→
Ÿ Button press
COURTESY LIGHT OFF
"START WITH AUTOMATIC CLOSING" to a transmitter button of
OPEN
STOP
CLOSE
STOP
OPEN
STOP
CLOSE
STOP
TAIMEN