Promise Technology FastTrak TX2200 User Manual page 95

The information tab displays the following information:
• Enclosure Type – The manufacturer's model name or number.
• Fan Speed – The RPM of the enclosure's cooling fans.
• Temperature – The internal temperature of the enclosure. Each reading
reflects a separate measurement.
• Power Status – The voltages supplied by the enclosure's 12V and 5V
systems.
The Fan, Temperature and Power icons change color when an error is
indicated, as shown below.
Fan Error
State
Green Disk drive is present
and ready
Blinking n/a
Amber Disk drive:
•
•
•
•
Red Disk drive:
•
•
Dark Power is off
An incident refers to one occurrence of out-of-range voltage, temperature or fan
speed. Any incident requires immediate attention.
For more information on Enclosures, replacing disk drives and other repair
operations, refer to the SuperSwap User Manual.
Temperature Error
Status
is spinning up
is critical
is rebuilding
reports a SMART
error
is offline
is not installed
Power Error
LEDs
Activity
Disk drive is present
and ready
Read/write activity
n/a
n/a
Disk drive:
• has failed
• is not installed
89
Chapter 5: WebPAM
Enclosure
Normal status
n/a
1 incident
(see below)
Enclosure is critical
but still functional
Attention required
2 or more incidents
(see below)
Disk drives are
spinning up