Table of Contents
Advertisement
FastTrak TX2200, TX2300 User Manual
11. For RAID 0 logical drives, select a Stripe Block Size of 32 KB, 64 KB, or
128 KB. 64 KB is the default.
See "Stripe Block Size" on page 96 for more information.
12. Select an Initialization policy from the dropdown menu.
•
Fast Initialization – Erases the Master Boot Record (MBR) of the
physical drives being added to the logical drive.
•
Full Initialization – Erases all sectors of the physical drives being
added to the logical drive.
•
None – No initialization. This choice is not recommended.
13. Click the Finish button.
If there are physical drives available, the Select RAID Level screen appears
again, where you can create an additional logical drive.
70
Advertisement
Table of Contents
Need help?
Do you have a question about the FastTrak TX2200 and is the answer not in the manual?