Table of Contents
Advertisement
FastTrak TX2200, TX2300 User Manual
Existing Installation
After installing the FastTrak TX Series RAID Controller card and rebooting your
system, Windows XP setup will show a "Found New Hardware" dialog box.
1.
Insert the FastTrak driver diskette into the A:\ drive.
2.
Choose Install the software automatically and press the Enter key.
3.
Choose Windows Promise FastTrak TX [2200, 2300] (tm) Controller from the
list that appears on screen, and then press the Enter key.
4.
If using a driver that has not been digitally signed by Microsoft, you will be
asked if you want to continue the installation. Click Continue anyway.
5.
When the New Hardware Wizard has finished installing the FastTrak driver,
click Finish.
Confirm Installation
1.
Right-click on the My Computer icon and select Manage from the popup
menu.
2.
From the left panel, select Device Manager.
3.
Click the "+" in front of SCSI and RAID controllers. "Windows Promise
FastTrak TX [2200, 2300] (tm) Controller" and "Promise RAID Console SCSI
Processor Device" should appear.
28
Advertisement
Table of Contents
Need help?
Do you have a question about the FastTrak TX2200 and is the answer not in the manual?