Temperature Lock - HotSpring GGE Owner's Manual

TEMPERATURE LOCK

Press on Home screen to display Temperature Lock.
SPA LOCK
Press on Home screen to display Spa Lock.
SUMMER TIMER
Press on Home screen to display Summer Timer.
circulation pump will remain on for approximately 5 minutes
pushing water through the heater to cool it down.
• Both heater and circulation pump will remain off for eight hours.
The circulation pump and heater will automatically shut down
for the same eight hours every day until the Summer Timer is
deactivated.
• It is recommended to activate the Summer Timer in the morning so
that the spa is off during the hottest part of the day and so that the
circulation pump will start up again in the evening when you are
ready to enjoy the spa.
Page 15
The Temperature Lock feature
prevents changing the desired
water temperature setting. All
other control panel functions
will operate normally while the
Temperature Lock is "ON".
Press and hold ON or OFF for
approximately 4 seconds to activate
or deactivate.
When activated, the Spa Lock
feature disables all functions on
the control panel.
The control panel will not
respond to anything except
on the Home screen.
Press and hold ON or OFF for
approximately 4 seconds to activate
or deactivate.
• The Summer Timer can be
activated during extremely hot
summer months to help maintain
set water temperatures.
• Activating the Summer
Timer causes the heater to
immediately shut down. The
Press ON or OFF to activate or deactivate.
TEMPERATURE ºF/ ºC SETTING
Press on Home screen to display first Settings screen, then press
to display Temperature in second Settings screen .
SCREEN BRIGHTNESS
Press on Home screen to display first Settings screen, then press
to display Brightness in second Settings screen.
LANGUAGE
Press on Home screen to display first Settings screen, then press
to display the current language in second Settings screen.
Page 15
Press ºF or ºC to display temperature in
either Fahrenheit or Celsius.
Auto
Brightness
Sensor
Press if the box is dark to activate the auto brightness
feature, a sensor (located to the left of LCD screen)
will automatically adjust the LCD to the ambient
lighting conditions.
Press or to turn AUTO brightness off and
m a n u a l l y increase or decrease the brightness of
the remote's screen. Press and hold either arrow to
continuously change the brightness setting.
The control panel screens can be
viewed in different languages
(ENGLISH illustrated).
Press to display Select Language screen.
NOTE: Press advance arrow to
see more languages.
Press on the new desired
language.
Operating Instructions