Temperature Control; Memory Screen; Clean Cycle Screen; Settings Screens - HotSpring HIGHLIFE GRANDEE Owner's Manual

Home Screen Features - Continued
Lights
Status Indicators
Summer Timer
or
Auto Clean
Spa/Temp Lock This indicator is on whenever the
Battery Life
Battery
Charging
FRESHWATER
Salt System
Working Screen Icons
Home Icon
or Return Icon
Advance Icon

TEMPERATURE CONTROL

Press the actual temperature on Home screen to
display Set Temperature screen.
The factory set temperature of the spa water is 38°C (100°F).
After the spa has been used, the last temperature value set by the user
will be stored in memory. If power is disconnected from the spa, it will
automatically revert to the last set temperature when power is reapplied.
Press to raise set temperature of spa. Press and hold to
raise the temperature continuously.
Press to lower set temperature of spa. Press and hold to
lower the temperature continuously.
Page 15
Press this icon to access the first
Lights screens.
This indicator is on whenever the
Summer Timer is ON or Auto Clean
is activated.
Spa Lock or Temperature Lock is ON.
This indicator tells you how much
battery life is still available to the
wireless remote control.
A flashing indicator tells you when
the battery is charging in the dock.
When indicator is solid, battery is
charged.
This indicator appears when the
FRESHWATER cartridge is over 4
months old and should be changed
soon.
Press to return to the Home screen.
Press to return to the previous
screen.
Press to advance to the next
screen.
The set temperature range is from
26°C to 40°C (80°F to 104°F).
NOTE: The water temperature may
vary depending on the current use
and condition of your spa and outside
temperatures.

MEMORY SCREEN

Press on Home screen to display Memory screen.
Press to activate the last saved set of operating
functions.
Press to save the current set of operating
functions (jets and lights only).
Press to return to home screen if neither of the
above buttons are used. Screen will automatically
revert back after 10 seconds of non activity.

CLEAN CYCLE SCREEN

Press on Home screen to display Clean Cycle screen.
Press to start the manual Clean Cycle. The
screen will briefly display CLEAN CYCLE:
ACTIVE. Activates jet pump 1 on high speed for
a ten minute period.
Press & hold to activate and deactivate the Auto
Clean Cycle. If activated, a clean cycle will run
every 24 hours starting at the time ON was first
pressed (runs Jet 2 for 1 minute and Jet 1 for 9
minutes, 10 minutes for spas that only have
Jet 1).
Press to return to Home screen. Screen will
automatically revert back after 10 seconds of non
activity.

SETTINGS SCREENS

Press on Home screen to display first Settings Screen.
The first Settings screen allows
you to turn Temperature Lock, Spa
Lock, Lights Timer and Summer
Timer On or Off.
Operating Instructions