Language; Brightness; Ace Water Care (Optional); Audio (Optional) - HotSpring GGE Owner's Manual

pump will start up again in the evening when you are ready to enjoy the
spa again.
IMPORTANT: The Summer Timer will not lower the spa's water
temperature below the ambient air temperature. Ambient conditions,
including humidity, wind and shading will affect your spa water
temperature.
To activate the Summer Timer, simply follow these steps:
• Press the OPTIONS Hard button on the Control panel.
• Press the soft button next to Set up.
• Press the soft button next to Summer
Timer to activate. The Summer Timer
icon (on the Home Screen) will display
when activated.
IMPORTANT: If water temperature
falls below 26.5°C (80°F) the summer
timer will automatically be disabled.
• The Summer Timer should be deactivated when cooler temperatures
return. To do this, simply repeat last 3 steps. The Summer Timer icon
will turn off.

LANGUAGE

The control panel screen can be viewed in five different languages.
The languages are English, French, German, Dutch, and Spanish. To
change languages:
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to Set-Up.
• Press the soft button next to
Language until the desired language
is visible.
IMPORTANT: Should you accidently
change the language screen into a
language you don't know, simply
repeat the previous steps where
Set-up is in the top right corner and
Language is in the lower right corner.

BRIGHTNESS

If you would like to change the brightness of the control panel screen:
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to Set-up.
• Press the soft button next to Brightness to lower the brightness
from 7 down to 1.
IMPORTANT: Pressing the Brightness soft button at number 1 will
increase the screen brightness back to 7.

ACE WATER CARE (OPTIONAL)

If your spa has the ACE WATER CARE system installed you can
navigate to the ACE screen as follows:
• Press the OPTIONS hard button on
the Control panel.
• Press the soft button next to ACE
Water Care.
(see ACE owner's manual for more
information).
Page 21

AUDIO (OPTIONAL)

If a wireless audio sound system is installed, both the Home screen
and the Options screen will display the Audio function.
To enter the Audio menu screen:
• Press the soft button next to Audio on the screen.
• Press the soft button next to Audio to turn the Sound System on or off.
Audio must be ON to advance the
audio screens.
• Press the soft button next to ▲ or ▼
to change the volume level.
• Press the Function: SET soft
button to advance to the Play/
Pause function screen.
• Press the soft button next to
PLAY/PAUSE to play or pause music.
• Press the Function: PLAY/
PAUSE soft button to advance to
the TRACK function screen. This
function will only control IPOD
source.
• Press the FORWARD or BACK soft
buttons to change the track (song).
• Press the Function: TRACK soft
button to advance to the SETUP
function screen. This function will
only control IPOD source.
• Press the ENTER SETUP soft button
to scroll to the SETUP SOURCE
screen.
IMPORTANT: If the Function:
SETUP soft button is pressed, the
screen will advance back to the
Volume screen. Press the Back
hard button to exit audio screens if
desired.
• This Source screen illustrates the
current audio source the spa is using.
• Press ▲ or ▼ soft buttons to
change the desired source: iPod
TV, AUX or Bluetooth ® . Audio must
be On for audio source to work.
To use the BLUETOOTH screen, your
audio BLUETOOTH device must be
paired with the spa. On your device,
find My Spa. If you do not see this on
your device you may be too far away
from spa. Pair your device and you will
be ready to use the BLUETOOTH.
Audio must be On to use BLUETOOTH
and only one paired BLUETOOTH
device will work at a time.
• Press SETUP SOURCE soft button to advance to the SETUP Tone,
Treble screen.
® ,
Operating Instructions