Temperature Lock - HotSpring Grandee NXT Owner's Manual

TEMPERATURE LOCK

Press on Home screen to display Temperature Lock.
SPA LOCK
Press on Home screen to display Spa Lock.
LIGHTS TIMER
Press on Home screen to display Lights Timer.
SUMMER TIMER
Press on Home screen to display Summer Timer.
will remain on for approximately 5 minutes pushing water through
the heater to cool it down.
• Both heater and circulation pump will remain off for eight hours. The
circulation pump and heater will automatically shut down for the
same eight hours every day until the Summer Timer is deactivated.
• It is recommended to activate the Summer Timer in the morning so
that the spa is off during the hottest part of the day and so that the
circulation pump will start up again in the evening when you are
ready to enjoy the spa.
Operating Instructions
The Temperature Lock feature
prevents changing the desired
water temperature setting. All
other control panel functions
will operate normally while the
Temperature Lock is "ON".
Press and hold ON or OFF for
approximately 4 seconds to activate
or deactivate.
When activated, the Spa Lock
feature disables all functions on
the control panel.
The control panel will not respond
to anything except
Home screen.
Press and hold ON or OFF for
approximately 4 seconds to activate
or deactivate.
When activated, the exterior lights
of the spa will come on 5 seconds
later will remain lit for 6 hours and
repeat the cycle every 24 hours
from activation time.
Press ON or OFF to activate or deactivate.
• The Summer Timer can be
activated during extremely hot
summer months to help maintain
set water temperatures.
• Activating the Summer Timer
causes the heater to immediately
shut down. The circulation pump
TEMPERATURE ºF/ ºC SETTING
Press
to display Temperature in second Settings screen .
SCREEN BRIGHTNESS
Press
to display Brightness in second Settings screen.
on the
LANGUAGE
Press
to display the current language in second Settings screen.
Page 15
Press ON or OFF to activate or deactivate.
on Home screen to display first Settings screen, then press
Press ºF or ºC to activate either Fahrenheit
or Celsius temperature.
on Home screen to display first Settings screen, then press
Auto
Brightness
Sensor
Press if the box is dark to activate the auto brightness
feature, a sensor (located to the left of LCD screen)
will automatically adjust the LCD to the ambient
lighting conditions.
Press or to turn AUTO brightness off and
manually increase or decrease the brightness of the
remote's screen. Press and hold either arrow to
continuously change the brightness setting.
on Home screen to display first Settings screen, then press
The control panel screens can be
viewed in different languages
(ENGLISH illustrated).
Press to display Select Language screen.
NOTE: Press
languages.
Press on the new desired
language.
to see more