HotSpring GRANDEE Instructions Manual

HotSpring GRANDEE Instructions Manual

Highlife collection
Hide thumbs Also See for GRANDEE:

Advertisement

HIGHLIFE
Congratulations on your decision to enjoy the finest spa available...
Welcome to the growing family of HOT SPRING spa owners.
Pre-Delivery Instructions
Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure
the safe, secure, and timely installation of your new spa. The following sections are guidelines on how to prepare for
delivery and set-up of your new spa. Specifically covered are site selection, delivery access, ground preparation, and
electrical requirements.
Remember to carefully review the Owner's Manual that accompanies your spa, and to register the spa's warranty
within 10 days of delivery. These items, along with other valuable information, will be found in the Owner's Package
which has been placed in the equipment compartment of your spa, where you will also find its serial number.
Watkins Manufacturing Corporation reserves the right to change features, specifications and design without
notification and without incurring any obligation.
DATE PURCHASED: _________________________________________________________________
DATE INSTALLED: ___________________________________________________________________
DEALER: ___________________________________________________________________________
ADDRESS: __________________________________________________________________________
TELEPHONE: _______________________________________________________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of
exterior surfaces (decks and gazebos). In addition, some communities have adopted residential barrier codes which
may require fencing and/or self-closing gates on the property to prevent unsupervised access to a pool (or spa) by
children under 5 years of age. Your HOT SPRING spa is equipped with a locking cover that meets the ASTM F1346-
91 Standard for Safety Covers and as a result, is usually exempt from most barrier requirements. As a general
practice, your local Building Department will inform you of any applicable barrier requirements at the time a permit is
obtained for the installation of an electrical circuit. Your Hot Spring dealer can provide information on which permits
may be required.
x
Hot Spring Spa Pre-Delivery Instructions
COLLECTION
®
Page x
Register your warranty
using the QR code below:
x

Advertisement

Table of Contents
loading

Summary of Contents for HotSpring GRANDEE

  • Page 1 HIGHLIFE COLLECTION ® Congratulations on your decision to enjoy the finest spa available... Welcome to the growing family of HOT SPRING spa owners. Pre-Delivery Instructions Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure the safe, secure, and timely installation of your new spa.
  • Page 2: Site Selection And Preparation

    If you install the spa outdoors, a reinforced concrete pad at least four inches thick is required for the Grandee ®...
  • Page 3: Delivery Access

    Use the information below to determine the requirements for access to your desired location. Model Width W Length L Height H GRANDEE (GG) 38" 8'4" 7'7" ENVOY (KK) 38" 7'9" 7'7"...
  • Page 4: Ground Preparation

    PEA GRAVEL *NOTE: A reinforced concrete pad at least four inches thick or a OR CRUSHED ROCK deck that is able to withstand more than 125 lbs. per square foot is required for the GRANDEE spa, and recommended for the ENVOY, VANGUARD, ARIA, SOVEREIGN, PRODIGY and JETSETTER spas. INSTALLATION NOTES: RAILROAD TIES • If stepping stones or railroad ties are selected for the spa foundation, they should be placed at the designated leveling areas of your spa to maintain even distribution of the spa weight.
  • Page 5: Grandee (Model Gg)

    100" (254 cm) DOOR SIDE NOTE: Watkins Manufacturing Corporation requires that the GRANDEE be installed on a minimum 10 cm (4”) thick reinforced concrete pad or a deck that is able to withstand more than 555 kg/m² (115 lbs. per square foot).
  • Page 6: Envoy (Model Kk)

    ENVOY (MODEL KK) ENVOY Dimensions NOTE: All dimensions are approximate; measure your spa before making critical design or pathway decisions. (Front view) DOOR 14 1/2" (36.8 cm) 42 1/2" (108 cm) MAIN DRAIN 72 1/2" (184.2 cm) 1 3/4” (4.4 cm) ELECTRICAL CUTOUT SECONDARY DRAIN 93"...
  • Page 7 VANGUARD (Model VV) & ARIA (Model AR) Dimensions NOTE: All dimensions are approximate; measure your spa before making critical design or pathway decisions. (Front view) DOOR 21.5" (54.6 cm) MAIN DRAIN 33" (83.8 cm) 1 3/4” (4.4 cm) ELECTRICAL CUTOUT 62 "...
  • Page 8: Sovereign (Model Ii)

    SOVEREIGN (Model II) Dimensions NOTE: All dimensions are approximate; measure your spa before making critical design or pathway decisions. (Front view) DOOR 14.5" (36.8 cm) 34.5" (87.6 cm) MAIN DRAIN 1 3/4” (4.4 cm) ELECTRICAL CUTOUT 60" (152.4 cm) SECONDARY DRAIN 38"...
  • Page 9: Jetsetter (Model Jj)

    JETSETTER (Model JJ) Dimensions NOTE: All dimensions are approximate; measure your spa before making critical design or pathway decisions. (Front view) DOOR 42" (106.7 cm) SECONDARY DRAIN 62" (157.5 cm) 66" (167.6 cm) MAIN DRAIN 1 3/4” (4.4 cm) ELECTRICAL CUTOUT 84"...
  • Page 10: Electrical Requirements

    Unless otherwise stipulated by your dealer, THIS IS YOUR RESPONSIBILITY. IMPORTANT: All electrical circuits must be installed by a qualified, licensed electrician. HOT SPRING spas are manufactured in two different electrical versions. The GRANDEE, ENVOY, VANGUARD, ARIA and SOVEREIGN models are available with a 230 volt continuous heating system. These spas cannot be converted to 115 volt operation.
  • Page 11 NOTE: Watkins Manufacturing Corporation RE QUIRES THE USE OF A SUBPANEL TO SUPPLY POWER AND PROTECT THE SPA. On the GRANDEE, ENVOY, VANGUARD, ARIA and SOVEREIGN models, the subpanel containing GFCI breakers is included with the spa. On the 230 volt JETSETTER model, the subpanel containing GFCI breakers must be purchased separately and can be purchased from your HOT SPRING dealer.
  • Page 12 SOVEREIGN (Model II) 230 volt permanently connected models WARNING! The exact physical location of the terminals on the GFCI breaker will vary between manufacturers. Connecting the hot wire to the neutral terminal will HEATER GROUND cause irreversible damage to the control box. 230V, 50 Amp, 2–POLE, CIRCUIT BREAKER (NON GFCI)
  • Page 13 WIRE INSTALLATION FOR CONTROL BOX TERMINAL BLOCK (Layout of Spa’s Terminal Blocks may vary) Insert Push top of screwdriver to screwdriver away engage cage from wire clamp Terminal Block Wire Installation Steps 1/2” Install Stripped end of wire into Strip wire Terminal insulation back Block...
  • Page 14 ADDITIONAL PRODUCTS AVAILABLE FROM YOUR HOT SPRING SPA DEALER • ACE ® Salt Water Sanitizing System • EverFresh ® water care system featuring the FreshWater ® III high output ozone, MPS, and FreshWaterAg+ Silver Ion Cartridge • Clean Screen Pre-filter ® • Vanishing Act ®...
  • Page 15: Spa Specifications

    Spa Specifications GRANDEE 7' 7" 38" 325 1060 6,455 125 230 v System, (Model GG) Square 4,000 gallons lbs. lbs. lbs. 230 volt, 50 8' 4" 97cm Seats 7 Adults Feet single phase 2.31m 1,893 2,928 square GFCI protected liters foot circuit 2.54m ENVOY 7' 9"...
  • Page 16 ® WATKINS MANUFACTURING CORPORATION 1280 Park Center Drive Vista, California 92081 (800) 999-4688 extension 8432 ©2014 Watkins Manufacturing Corporation. Hot Spring, Built for a lifetime of relaxation, Moto-Massage, Highlife, Grandee, Envoy, Vanguard, Aria, Sovereign, Prodigy, Jetsetter, AutoFresh, Comfort Control, CoverCradle, GlideRite, Lift’nGlide, UpRite, IQ 2020, CoverShield, ACE, EverFresh, FreshWater, Vanishing Act and The Home Relaxation Specialists are trademarks of Watkins Manufacturing Corporation. Part #62904.14 Rev. A (5/14) Page x...

This manual is also suitable for:

EnvoyVanguardAriaSovereignJetsetter

Table of Contents