Table of Contents
Advertisement
– First fit the glass with the fastening tabs over the frame of the
switch. Next press the front part until the two long tabs click on
the support.
Additional brake lights*
Given the difficulty involved in the replacement of this light it should be done
by the Technical Service.
Boot light*
Safety First
Fig. 149 Luggage
compartment light
Operating instructions
– Extract the tulip shaped fitting by pressing on the inside edge of
this -arrow- using the flat side of a screwdriver
– Press the lamp sideways and remove it from its housing
⇒ fig.
150.
Jump-starting
Jump leads
The jump lead must have a sufficient wire cross section.
If the engine fails to start because of a discharged battery, the battery can be
connected to the battery of another vehicle to start the engine.
Practical tips
If and when
Fig. 150 Luggage
compartment light
⇒ fig.
149.
Technical Data
219
Advertisement
Table of Contents
