Table of Contents
Advertisement
Main beam and side lights
– Raise the bonnet.
Safety First
Fig. 135 Main beam
headlights
Fig. 136 Side lights
Operating instructions
A
– Move the loop
in the direction of the arrow and remove the
2
⇒ fig.
cover
135.
– Remove the connector by pulling outward.
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
Single headlamps
A
Side lights - Dipped beam/main beam.
A
A
Indicator
B
Practical tips
If and when
Fig. 137 Single head-
lamp
Technical Data
213
Advertisement
Table of Contents
