Table of Contents
Advertisement
102
Seats and stowage
Removing or adjusting head restraints
The head restraints can be adjusted by moving them up and
down.
Adjusting height (front seats)
– Press the button on the side and pull upwards to the desired
position.
– To lower the head restraint, press the button and push head
restraint downwards.
– Make sure that it engages securely into position.
Adjusting height (rear seats)
– Press the button on the side and pull upwards to the desired
position.
– To lower the head restraint, press the button and push head
restraint downwards.
– Make sure that the head restraint engages securely in one of its
positions. ⇒ page 13
Removing the head restraint
– Push the head restraint up as far as it will go.
– Press the button
– Pull head restraint out of fitting without releasing the button.
Fitting the head restraint
– Insert the head restraint into the guides on the rear backrest.
Fig. 67 Adjusting and
– Push head restraint down.
removing the head
restraints
– Adjust the head rest to suit passenger's height ⇒ page 12.
•
Never drive if the head restraints have been removed. Risk of injury.
•
Never drive if the head restraints are in an unsuitable position, there is
a risk of serious injury.
•
After refitting the head restraint, you must always adjust it properly for
height to achieve optimal protection.
•
Please observe the safety warnings ⇒ page 101, "Correct adjustment
of head restraints".
Note
•
To fit and remove the rear head restraints, gently tilt the seat backrest
forwards.
⇒ fig. 67
(arrow).
WARNING
Advertisement
Table of Contents
