Table of Contents
Advertisement
Turn signal and main beam headlight lever
The turn signal and main beam lever also operates the
parking lights and the headlight flasher.
The turn signal and main beam headlight lever has the following
functions:
Switching on the turn signals
– Move the lever all the way up
A
all the way down
2
Signalling a lane change
A
– Push the lever up
resistance and then release it. The turn signal will flash several
times. The corresponding warning lamp will also flash.
Safety First
Fig. 56 Indicator and
main beam headlight
lever
⇒ fig. 56
A
to indicate right, and
1
to indicate left.
A
or down
to the point where you incur
1
2
Operating instructions
Switching main beam on and off
– Turn the light switch to position
⇒ fig. 56
– Press the lever forward
beams.
– Pull the lever back towards you to switch the main beam head-
lights off again.
Headlight flashers
– Pull the lever towards the steering wheel
flasher.
Switching on parking lights
– Switch the ignition off and remove the key from the lock.
– Move the lever up or down to turn the right or left-hand parking
lights on, respectively.
WARNING
The main beam can dazzle other drivers. Risk of accident! Never use the
main beam headlights or the headlight flasher if they could dazzle other
drivers.
Note
•
The turn signals only work when the ignition is switched on. The corre-
sponding warning lamp
or
flashes in the combi-instrument. The
warning lamp
flashes when the indicators are operated, provided a trailer
is correctly attached and connected to the vehicle. If a turn signal bulb is
defective, the warning lamp flashes at double speed. If the trailer turn signal
bulbs are damaged, warning lamp
Practical tips
Lights and visibility
.
A
to switch on the main
4
A
to operate the
3
does not light up. Change the bulb.
Technical Data
91
Advertisement
Table of Contents
