Shortcuts Using The Shift Button - Korg prologue Owner's Manual

4.
Press the WRITE button.
The display will indicate the message "Are you sure?".
5.
Turn the PROGRAM/VALUE knob to select "Yes", and press the WRITE but-
ton.
The factory-set default data will be reloaded, and the prologue will be restored
to its factory default state.
Press the EXIT button, or select "No" using the PROGRAM/VALUE knob
TIP
and press the WRITE button to cancel the operation.
Never turn off the prologue while data is being loaded.

Shortcuts using the SHIFT button

When in Play mode, you can hold down the SHIFT button and press other buttons
at the same time for direct access to various convenient functions.
Function
Tuning EXIT button
Pitch settings PITCH knob
Effect select OFF/ON/SELECT
switch (MOD EFFECT)
LFO waveform INT knob (LFO)
phase settings
MULTI EN- SHAPE knob (MULTI
GINE parameter ENGINE)
settings
SHIFT button +
63
When the prologue's sound generator is not
making any sound, auto-tuning occurs au-
tomatically; but you can use this function to
retune the prologue manually in Play mode
if the tuning seems to be drifting.
The internal temperature tends to changes
more right after the power is turned on,
which may cause the instrument to go out of
tune.
Press the EXIT button while holding down
the SHIFT button again to cancel manual
tuning, if you accidentally started it by mis-
take.
Sets the pitch in semitones.
Pushing this switch to SELECT allows you to
set the effect's sub-type.
This allows you to invert the phase of the
LFO waveform.
Adjusts the modulator ratio when setting the
VPM with the MULTI ENGINE's NOISE/
VPM/USR switch.