Korg prologue Owner's Manual page 46

Button 3 (TIMBRE)
This configures the timbre settings.
Sub Timbre
Sets whether the sub-timbre is enabled or disabled.
Edit Timbre
This selects the timbre to edit.
Main: Edits the main timbre.
Main+Sub: Edits both the main and sub-timbres.
Sub: Edits the sub-timbre.
Editing a timbre applies to the basic parameters on the front panel, as well
TIP
as all detailed parameters in PROGRAM EDIT mode.
Timbre Type
Sets the performance type for the main timbre and the sub-timbre.
Layer: The main timbre and sub-timbre will be layered together when playing.
Xfade: As you move up the keyboard, the sub timbre will gradually fade into the
main timbre.
Split: The main timbre and sub-timbre will be split into different ranges of the key-
board when playing.
Main/Sub Balance
Adjusts the volume balance between the main timbre and the sub-timbre.
64: The volume for the main timbre and the sub-timbre will be the same.
Increasing the value will make the main timbre louder, and decreasing the value
will make the sub-timbre louder.
Main/Sub Position
This sets the positions of the main timbre and the sub-timbre.
Sub <--> Main: Positions the main timbre on the right side of the keyboard, and the
sub-timbre on the left side.
Main <--> Sub: Positions the main timbre on the left side of the keyboard, and the
sub-timbre on the right side.
Split Point
This sets the split point for the main and sub-timbres.
[Off, On]
[Main, Main+Sub, Sub]
[Layer, Xfade, Split]
[0...127]
[Sub <--> Main / Main <--> Sub]
[C-1...9]
46