Korg prologue Owner's Manual page 50

Button 7 (MULTI ENGINE)
This button configures the MULTI ENGINE settings.
The parameters that are displayed will change, depending on the settings in "NOISE/
VPM/USR switch" (p.26), MULTI ENGINE.
When the noise generator is selected
There are no parameters to set for the noise generator.
When the VPM oscillator is selected
The VPM oscillator has 16 presets, each with six parameters.
You can set these parameters to make changes to the sound.
If all parameters are set to 0%, the effects set in the preset will be used, and the effect
will increase as the value is increased (+).
Feedback (Parameter 1)
Sets the depth of the modulator feedback.
Noise Depth (Parameter 2)
Adjusts the depth of the noise modulation.
Shape Mod Int (Parameter 3)
Adjusts the depth of the internal EG effect.
Mod Attack (Parameter 4)
Adjusts the attack time of the internal EG.
Mod Decay (Parameter 5)
Adjusts the decay time for the internal EG.
Mod Key Track (Parameter 6)
Adjusts the depth of the modulator effect from keyboard tracking. The higher the
sound frequency, the less noticeable the effect becomes.
When the user oscillator is selected
See the "prologue user contents guide" (www.korg.com) for details.
[-100%...+100%]
[-100%...+100%]
[-100%...+100%]
[-100%...+100%]
[-100%...+100%]
[-100%...+100%]
50