Saving A Program - Korg prologue Owner's Manual

Saving a Program

We recommend that you save your Program on the prologue after editing the sound.
Any edits that you make to the current program will be lost if you turn off
the power or recall a different program before saving.
1.
Edit the program in Play mode.
For details, refer to "Basic Parameter Editing" (p.20).
2.
Press the WRITE button; the prologue will enter the Write standby mode, and
the WRITE button will blink.
The message "Where to write?" will appear in the display.
3.
Turn the PROGRAM/VALUE knob to select the Program number where your
new sound will be saved.
Press the EXIT button to cancel the operation.
TIP
4.
Press the WRITE button once more.
The Program will be saved in internal memory, and the message "Complete"
will appear in the display.
Never turn off the power while Programs are being saved. Doing so may
destroy the internal data.
19