Page of 58

Korg minilogue Owner's Manual: Shortcuts Using The Shift Button

Polyphonic analogue synthesizer.
Hide thumbs

Shortcuts using the SHIFT button

By holding down the SHIFT button as you press other select buttons, you can
access a number of convenient features quickly and easily.
Function
When in Play mode:
Load panel infor-
mation
PLAY button
When in Play mode:
Tuning
REC button
When in Play mode:
Delete sequence
data
REST button
When in Play mode:
Select a Program
PROGRAM/VALUE
knob
When in Play mode:
Select a favorite
Program
Buttons 1–8
While in Step Edit:
Set the step length
PROGRAM/VALUE
knob
While in Step Edit:
Select the step
Buttons 1–8
SHIFT button +
Loads the state of the front panel switches and
knobs into the selected Program.
Used to make the sound match the state of the
controls on the front panel.
When the minilogue's sound generator is not
making any sound, auto-tuning occurs auto-
matically; but you can use this function to re-
tune the minilogue manually in Play mode if
the tuning seems to be drifting.
The internal temperature tends to changes
more right after the power is turned on, which
may cause the instrument to go out of tune.
Press the REC button while holding down the
SHIFT button again to cancel manual tuning, if
you accidentally started it by mistake.
Deletes all sequence data for the selected Pro-
gram (including notes and Motion Sequence
settings).
Press the REC button while holding down the
SHIFT button again before doing anything else
to cancel deleting the sequence data, if you ac-
cidentally started this operation by mistake.
Skips the selected Program forward or back-
wards, in increments of 10.
Selects a Program that has been registered as a
favorite Program.
Allows for the step length value to be
changed.
When the current step selected is at 1–8, this se-
lects steps 9–16. When the current step selected
is at 9–16, this selects steps 1–8.
49

Advertising

   Also See for Korg minilogue

Comments to this Manuals

Symbols: 0
Latest comments: