Korg prologue Owner's Manual page 48

Button 5 (MODULATION)
Configures the modulation settings.
LFO Target OSC
This selects the oscillator that modulation will be applied to.
All: Modulation is applied to operators 1 and 2, as well as the MULTI ENGINE.
VCO1+2: Modulation is applied to operators 1 and 2.
VCO2: Modulation is applied to operator 2.
Multi: Modulation is applied to the MULTI ENGINE.
LFO Key Sync
With the LFO Key Sync set to On, the phase of the LFO will be reset with each note-
on received from the keyboard.
LFO Voice Sync
Use the LFO Voice Sync to choose whether the phase of the LFO will be synchro-
nized between voices.
EG Velocity
Sets the strength of the Cutoff EG Int using velocity.
Amp Velocity
Amp Velocity is used to specify how much the volume will change according to the
keyboard velocity.
0: The velocity will not affect the volume.
The larger the value, the more effect that keyboard velocity will have on volume.
[All, VCO1+2, VCO2, Multi]
[Off, On]
[Off, On]
[0..127]
[0..127]
48