Korg prologue Owner's Manual page 40

Setting the timbre parameters
You can also use split, crossfade or layering when playing two timbres, as well as
adjust their volume balance.
prologue-16
1.
Use the knobs and switches on the front panel to set the timbre parameters.
Adjust the volume balance between the main timbre and the sub-timbre using
the MAIN/SUB BALANCE knob. For details, refer to "MAIN/SUB BALANCE
knob (prologue-16 only)" (p.22).
Use the TYPE switch to set the timbre performance type (layer, crossfade or
split). For details, refer to "TYPE switch (prologue-16 only)" (p.22).
Set the timbre position and split point (when playing in split mode) in "Timbre,"
PROGRAM EDIT mode. Refer to "Button 3 (TIMBRE)" (p.46) for details.
Set the timbre to edit using the PANEL switch.
Editing a timbre applies to the basic parameters on the front panel, as well
TIP
as all detailed parameters in PROGRAM EDIT mode.
prologue-8
1.
Press the EDIT MODE button.
The instrument will enter Edit mode.
2.
Turn the PROGRAM/VALUE knob or press the EDIT MODE button, and se-
lect PROGRAM EDIT.
3.
Press button 3 several times.
Each parameter related to the timbre is shown on the display.
Refer to "Button 3 (TIMBRE)" (p.46) for details on each parameter.
4.
Turn the PROGRAM/VALUE knob to change the settings.
5.
Press the EXIT button.
40