Button 6 (GLOBAL 6)
MIDI Rx Prog Chg
Selects whether MIDI program change messages will be received.
MIDI Rx CC
Selects whether MIDI control change messages will be received.
MIDI Rx Pitch Bend
Selects whether MIDI pitch bend messages will be received.
MIDI Tx Prog Chg
Selects whether MIDI program change messages will be transmitted.
MIDI Tx CC
Selects whether MIDI control change messages will be transmitted.
MIDI Tx Pitch Bend
Selects whether MIDI pitch bend messages will be transmitted.
Button 7 (GLOBAL 7)
These parameters relate to the prologue's display, and what information is seen
there.
Parameter Disp
Normal: Only major information such as operating the pitch-related knobs or
switching the OUTPUT ROUTING switch will be displayed.
All: When any knob except for the MASTER knob, the GAIN knob in the L.F.
COMP. section (prologue-16 only) or the MULTI ENGINE TYPE knob is turned, the
value is indicated; and when operating a switch, the setting is indicated. Parameters
for switches that have an LED may not show up in the display.
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Normal, All]
60