Media Sensor Control - GRAPHTEC FC5100-75 User Manual

114
BACKGROUND SETTINGS, turn off the plotter if you do not wish to make any
changes.
Media Sensor
Control
performed after selecting the media type during the plotter's initialization.
may go beyond the edge of the media.
CAUTION: Always set the AREA function to limit the cutting area and protect the machine.
• Press the F3 key to select ENABLED or press the F4 key to select DISABLED. A
• Press the ENTER key to register your setting and to proceed to the next menu.
key if you do not wish to make any changes. If you used METHOD 2 to select
BACKGROUND SETTINGS, turn off the plotter if you do not wish to make any
changes
Pinch Roller Sen-
sor Control
sensing media width is performed after selecting the media type during the plot-
ter's initialization.
NOTE:
may go beyond the edge of the media. Always set the AREA function to limit the
cut area and to protect the cutting mat from damage.
Ba ck gr ou n d S e tt in g s: B ack g r o un d S e t ti ng s f or G P - G L
This function allows you to disable the media length sensor function which is
When ENABLED is selected, the media length sensor will perform.
When DISABLED is selected, the media length sensor will not perform.
In cases where the media length sensor function is disabled, the pen carriage
blinking cursor appears beside your choice.
Press the NEXT key if you wish to bypass this setting with no changes.
If you used METHOD 1 to select BACKGROUND SETTINGS, press the MENU
This function allows you to disable the pinch roller position sensor function of
When ENABLED is selected, the pinch roller position sensor will perform.
When DISABLED is selected, the pinch roller position sensor will not perform.
When disable is selected, the new home position will be the point that the pen
is when the unit is powered up. The pen carriage can only move to the left from
the new home position. Always, set the new home positon manually BEFORE
the plotter is powered down.
In cases where the pinch roller sensor function is disabled, the pen carriage
MEDIA SENSOR
ENABLED
DISABLED
PINCH ROLLER SENSOR
ENABLED
DISABLED
.
.
.
.