Chapter 9: Specifications - GRAPHTEC FC5100-75 User Manual

Chapter 9: Specifications

This chapter describes the plotter's main specifications
Main Specifications: FC5100-75
CPU
Configuration
Drive
Max. Cut Width (expanded mode)
Guaranteed precision cutting area
Max. Loadable Media Width
Max. cutting speed (Axial)
Cutting Pressure
Min. character size
Mechanical resolution
Programmable resolution
Number of cutters/pens
Cutter types
Pen types
Pounce types
Compatible media
Standard interfaces
Buffer memory
Resident command sets
LCD Panel
Compatible paper for pouncing
Power supply
Power consumption
Operating environment
External dimensions without stand
Weight
a. HP-GL is a trademark of Hewlett-Packard Company
b. Using CB15U-K30 blades to cut sandblast rubber
16-Bit
Grit-rolling cutting plotter
Digital servo
758 mm (29.6 in.)
9m (30 ft.) with approved media
914 mm (36 in.)
1414 mm/sec (55.7 ips) Diagonal Direction
10 to 500 g
3mm (0.125 in.) alphanumeric Helvetica med. Font
0.005mm (0.0002 in.)
GP-GL: 0.01mm (0.0004 in.) and HP-GL
1
Supersteel, ceramic and sapphire blades
Water and oil based fiber-tip, water based ballpoint, ceramic, refillable ink,
and disposable ink pens
1.2mm diameter pin
Mono-vinyl chloride media, fluorescent media, and media for illuminated
displays, high reflective media, up to 0.25mm thick, Sandblast rubber up to
b
1mm thick
RS-232C, Centronics, USB (USB1.1 Full Speed)
2 Mb
HP-GL, GP-GL
LCD 20x4 - Supports 12 languages: Danish, Dutch, English, French, Ger-
man, Hungarian, Italian, Japanese, Norwegian, Portuguese, Spanish,
Swedish
Regular paper from 0.06 to 0.13 mm thick
100-240VAC/48-62 Hz Universal Power Supply
140VA max.
Temperature: +10º C to +35º C or +50º F to +95º F
Humidity: 35% to 75% (non-condensing)
1135mm x 350mm x 485 mm or 44.5" x 14" x 19"
31 Kg or 69 lbs.
Sp ec if ic at io n s: Ma in Sp e cif i cat io n s: FC 51 00 -7 5
TMa
0.025mm (0.001in.
151