Circle Resolution - GRAPHTEC FC5100-75 User Manual

122

Circle Resolution

when drawing with the circle or arc commands.
optimized.
degrees. If the circle or arc consists of short line segments, the quality of the cir-
cle or arc will not change by this setting.
• Press the F3 key to select AUTO or press the F4 key to select DEFAULT. A
• Press the ENTER key to register your setting and to proceed to the next menu.
key if you do not wish to make any changes. If you used METHOD 2 to select
BACKGROUND SETTINGS, turn off the plotter if you do not wish to make any
changes.
Check Pen
installed machine can hold one blade or pen in the pen holder on the pen carriage
(which is referred to as PEN 1) and one pen in the pen holder on the right side
plate (which is referred to as PEN 2). This function is used to enable or disable
checking PEN 2.
check if performed during the plotter's initialization after selecting the media type.
installed uring the plotter's initialization after selecting the media type.
CAUTION: If DISABLE is selected, the PEN 2 should be installed before turning on the
Ba ck gr ou n d S e tt in g s: B ack g r o un d S e t ti ng s f or H P - G L
Use this selection to achieve smoother cut/plot quality on large circles or arcs
When AUTO is selected, the resolution of circles and arcs will be automatically
When DEFAULT is selected, the resolution of circles and arcs is always 5
blinking cursor appears beside your choice.
Press the NEXT key if you wish to bypass this setting with no changes.
If you used METHOD 1 to select BACKGROUND SETTINGS, press the MENU
This setting is availabe when the 2 Pen option is installed. The 2 Pen option
When ENABLE is selected, the plotter checks to see if PEN 2 is installed. This
When DISABLE is selected, the plotter does not check to see if PEN 2 is
plotter.
CIRCLE RESOLUTION
AUTO
DEFAULT
CHECK PEN
ENABLED
DISABLED
.
.
.
.