Fc5100 Media Roll Holder Manual - GRAPHTEC FC5100-75 User Manual

FC5100 Media Roll Holder Manual

age of your common media colors. The Media Roll Holder is optional for the
FC5100-75, FC5100-100 and FC5100-130 cutter models.
• Always move the roll holders closer together as the rolls become smaller with
• Make sure the diameter of the media is no larger than 6 inches.
WARNING: Use two people to pick up the plotter.
CAUTION: Removing the plotter from the stand when the conveyor rollers are loaded will
NOTE:
Contents
1
2
3
4
5
Media Roll
Holder Assembly
assemble the Media Roll Holder Assembly for the GRAPHTEC FC5100 Cutting
Plotter. For the best results follow all instructions carefully.
A
4mm L wrench hex key tool provided with your Media Roll Holder assembly.
The FC5100 Media Roll Holder allows for multiple roll capability and easy stor-
To use the media stored in the Media Roll Holder:
use.
cause the unit to become unstable and tip over.
Keep casters locked during assembly.
Left Media Roll Holder Bracket (Qty. 1)
Right Media Roll Holder Bracket (Qty. 1)
Conveyor Rollers (Qty. 2)
M6 x 16mm socket button head cap screws (Qty. 4)
4mm L wrench hex key tool (Qty. 1)
The following information will give you step-by-step instructions on how to
A
SSEMBLY REA
Assemble the Media Roll Holder on a secure, flat surface. You will be using the
O pt io n s: F C5 10 0 M ed ia R ol l Ho ld er M a n ua l
166