Rs-232C Serial Interface - GRAPHTEC FC5100-75 User Manual

• Press the F2 key or the F3 key to select the X or Y Axis. Press the UP or DOWN
• Press the F4 key to reset the DISTANCE ADJUST parameter to 0% on the X and
• Press the ENTER key to register your settings.

RS-232C Serial Interface

of Electronic Industries Association (EIA). This serial interface performs the serial
transfer of digital binary data, control signals and SYNC signals.
ARROW key to set the DISTANCE ADJUST parameter. DISTANCE ADJUST can
be set from -2.00% to +2.00% in 0.05% increments.
Y Axises.
CONDITION
The RS-232C Serial interface of your plotter conforms to the RS-232C Standard
Table 1: RS232 Serial Interface Specifications
Standard
Synchronization
Transfer Rate
Stop Bit
Parity
Character length
A dv an ce d F u nc ti o ns a nd Set t in gs : RS- 23 2C Se ria l In t erf ac e
DISTANCE ADJUST
1... X = 0.00%.
Y = 0.00%.
RESET>.
CCITT V.24, EIA RS-232C, JIS X5101
Asynchronous start-stop
19200 bits/s
2 stop bits
Even, odd, none
7 or 8 bits
103