48 Operation principle and hardware description
Marine construction (option +C121)
The option includes the following accessories and features:
•
reinforced mechanics
•
grab railings
•
door flush bolt which allows the door to open 90 degrees and prevents it from
slamming close
•
self-extinctive materials
•
flat bars at base of the cabinet for fastening
•
fastening braces at the top of the cabinet.
Required options: Appropriate additional wire marking option (see page 50) according to
the requirements of the classification society
Related options: halogen-free materials and wiring (+G330)
UL listed (option +C129)
The option includes factory inspection of the cabinet according to UL 508C and the
following accessories and features:
•
US type main switch and fuses
•
top entry and exit of cables
•
US cable conduit entry (plain plate without ready-made holes)
•
all components UL Listed/Recognized
•
maximum supply voltage 600 V.
Related options: +H358 (cable conduit entry)
CSA approved (option +C134)
The option includes the following accessories and features:
•
US/CSA type main switch fuse
•
bottom entry and exit of cables
•
US cable conduit entry (plain plate without ready-made holes)
•
all components UL/CSA listed/recognized
•
maximum supply voltage 600 V.
Seismic design (option +C180)
The option includes the following accessories and features:
•
reinforced plinth
•
flat bars at base of the cabinet for fastening.
Resistor braking (options +D150 and +D151)
See chapter
Resistor braking
EMC filters (option + E202)
See section
Type designation key
EMC Directive
on page
More information: Technical Guide No. 3 – EMC Compliant Installation and Configuration
for a Power Drive System (3AFE61348280 [English])
on page 235.
on page
53
184
and
Compliance with EN 61800-3:2004
and sections
Compliance with the European
on page 187.