Directive - Codan 2110 Getting Started Manual

European Radio and Telecommunications
Terminal Equipment Directive
2110 SSB Transceiver Getting Started Guide
The 2110 SSB Transceiver has been tested and complies with
the following standards and requirements (articles of the
R&TTE Directive):
• Article 3.1b: ETSI EN 301 489-1
• Article 3.1b: ETSI EN 301 489-15
• Article 3.2: Australian type approval according to
AZ/NZS 4770:2003
• Article 3.1a: assessed against ICNIRP requirements
• Article 3.1a: EN 60950
Compliance with these standards is deemed sufficient to fulfil
the requirements of the R&TTE Directive 1999/5/EC.
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the
markings on the model label of the product.
Declaration of Conformity and Expert Letter of
Opinion
The CE Declaration of Conformity and Expert Letter of
Opinion for this product is listed on
documents. This document can be made available upon
request to Codan or a Codan-authorised supplier.
2110 SSB Transceiver compliance
,
0191 0191
page 73, Associated
or
5