Electrical Safety - Codan 2110 Getting Started Manual

2110 SSB Transceiver compliance
8

Electrical safety

To ensure compliance with the European Low Voltage
Directive is maintained, you must deploy and use the
2110 SSB Transceiver and antennas in accordance with the
instructions in the 2110 SSB Transceiver Getting Started
Guide, the Quick Reference Cards supplied with each antenna,
and the 2110 SSB Transceiver Reference Manual.
When using equipment that is connected directly to the AC
mains these precautions must be followed and checked before
applying AC power to the unit:
1
Use the standard AC mains cable supplied.
1
Ensure the covers for the equipment are fitted correctly.
The 3121 AC Battery Charger is double insulated and
marked with
CAUTION
WARNING
Batteries
Battery cells are electrically live at all times and must be
treated with extreme caution. They may supply high short-
circuit currents even if they appear to be damaged or
inoperable.
Batteries should be used to provide power to the transceiver
only, using the supplied connectors.
The batteries will not charge at temperatures higher than 40°C.
.
If it is necessary to remove the covers
during service by a qualified electronics
technician, they must be refitted correctly
before using the equipment.
The protective cover must always be fitted
when the 3121 AC Battery Charger is
connected to the AC mains.
2110 SSB Transceiver Getting Started Guide