Codan 2110 Getting Started Manual page 80

Definitions
70
This term Means...
macro A short set of instructions to automate a task
you perform with the transceiver. When a
macro is assigned to a key, the key becomes
a hot key.
manual sounding A Channel Test call made in an
ALE/CALM network using the text
SOUNDING as the call address. The
station performs a sounding operation,
which other stations use to update the
information in their LQA database.
Manual sounding is available if the MIL-
STD-188-141B ALE option is installed.
Message call A call that enables you to send a message to
a specific station.
mode A type of reception or transmission you can
use with a channel, comprising a sideband
and an IF filter.
network Two or more stations that use the same
frequencies and call system to
communicate.
Phone call A call that enables you to connect to a
public telephone network.
PTT button Press-to-talk button, located on the left side
of the handset. This button enables you to
communicate during voice calls, switch
mute off, cancel voice calls prior to the
point where voice can be transmitted, cancel
calls where data is being transmitted, and
exit out of editable screens without saving
changes.
revertive A signal sent by a station in response to a
call.
2110 SSB Transceiver Getting Started Guide