Codan 2110 Getting Started Manual page 61

2110 SSB Transceiver Getting Started Guide
Setting up a scan list
To set up a scan list:
1
Open Quick Start.
1
Scroll to Set scan list, then press
The first channel in the transceiver is displayed.
1
If you want to add this channel to the scan list, press
If you do not want to add this channel to the scan list,
press .
When all the channels have been viewed or you have
added 20 channels to your scan list, the transceiver will
return to Quick Start.
If you do not want to scroll through all the channels in
your scan list, hold
1
Close Quick Start, if required.
CAUTION
Setting the time and date
To set the time and date:
1
Open Quick Start.
1
Scroll to Set time/date, then press
The display will appear with a line under the day of the
month.
1
Use or to change the current setting to the correct
value, then press
The line will appear under the month.
1
Repeat the previous step until you have made all of the
changes to the time and date.
to return to Quick Start.
Each time you enter Set scan list, the
resulting scan list will overwrite the
existing scan list.
.
Using Quick Start
.
.
.
51