Removing Cylinder Head; Removing Cylinder And Piston - KTM 400-660 LC4 1998-2005 Repair Manual

3
6

Removing cylinder head

1
– Unscrew chain guide bolt
2
– Unscrew the 4 collar bolts
4

Removing cylinder and piston

– Unscrew the 4 collar nuts at the cylinder base
– Remove cylinder and cylinder base gasket.
5
– When working on an engine with a microfilter, remove the AH bolt
– Disconnect the oil hose at the clutch cover and remove the
1
4
6
before taking off the cylinder.
microfilter together with the holder.
2
incl. gasket, bolts and collar nuts
and detach cylinder head with gasket.
5
.
4-10E
3
.