Preparatory Work; Left Side Of The Engine - KTM 690 LC4 2007 Repair Manual

1
2
4
5
4
6

Preparatory work

– Thoroughly clean the outside of the engine.
– Drain the engine oil.
– Clamp the engine in the engine work stand 560.12.001.000 with
holders 750.12.001.060 and 750.12.001.070.

Left side of the engine

– Remove both screws
starter engine.
– Remove the valve cover screws and lift off the valve cover.
– Remove the screws on the generator cover
generator cover. Pull out the centering sleeves, remove and discard
the gasket.
– Remove the gear sensor
3
– Remove both contact bolts
– Take both contact springs
on the starter engine and dismount the
1
2
.
3
and the O-ring .
4 5
out of the bores.
6
4-2
and lift off the