Electric Starter System - KTM 400-660 LC4 1998-2005 Repair Manual

7-11E
G
1
Battery
2
Ignition lock
3
Emergency off switch
4
Auxiliary relay
5
Tip switch built in emergency off switch
6
Neutral switch
7
Clutch switch
8 Starter relay
9 Starter motor
bl . . . . . . . . .blue
br . . . . . . . . .brown
ge . . . . . . . .yellow
gr . . . . . . . . .grey
g . . . . . . . . .green
o . . . . . . . . .orange
r . . . . . . . . . .red
ra . . . . . . . . .pink
s . . . . . . . . . .black
v . . . . . . . . .violet
w . . . . . . . . .white
ge-bl
10 A
2
ge-r
to EPC control
unit
3
20 A
1
9
M

Electric Starter system

NOTE: The electric starter system is equipped with a safety mechanism.
Starting is possible only in the following conditions:
● ignition lock in position
● emergency OFF switch in position
● transmission set to idle, or clutch is pulled
Function of the electric starter system:
1
From the battery , battery voltage is supplied via the ignition lock
and the emergency OFF switch
4 5
relay and the tip switch
The contact of the auxiliary starter relay will enable starting only if at
least one of the following conditions is met :
● transmission is set to idle (idle switch
● clutch is pulled (clutch switch
5
If the tip switch is actuated, the electric starter motor
8
by way of the starter relay
5
4
8
7 6
or
3
to the coil of the auxiliary starter
.
6
closed)
7
closed)
.
2
9
is turned on