Radio Data System Operations - JVC UX-DM9DB Instructions Manual

Radio Data System Operations

Remote control
REPEAT
Receiving FM Stations with Radio Data
System Remote
ONLY
Radio Data System allows FM stations to send additional
signals along with their regular program signals.
This System can receive the following types of Radio Data
System signals.
PS (Program
Service)
PTY (Program
Type)
RT (Radio Text)
Enhanced Other
Networks
To show the Radio Data System information
While listening to an FM station...
Frequency
(Non-Radio Data
System signal)
Station names are displayed. "NO PS" will
PS
appear if no signal is sent.
The broadcast program type is displayed. "NO
PTY
PTY" will appear if no signal is sent.
Text messages that the station sends are
RT
displayed. "NO RT" will appear if no signal is
sent.
* See page 15.
DISP/CHARA
PTY SEARCH
TA/News/Info
Shows commonly known
station names.
Shows types of broadcast
programs.
Shows text messages that the
station sends.
Provides information about the
types of programs broadcast by
the Radio Data System stations
of the different networks.
PS PTY RT
MEM REMAIN*
USB REMAIN*
Clock
Searching for a Program by PTY Codes
You can locate a particular kind of program from the preset
stations (see page 8) by specifying the PTY codes.
• For details about PTY codes, see page 17.
To search for a program using the PTY codes
1 While listening to an FM station...
2
Select a PTY code.
3 Start searching.
Ex. When "News" is selected
The System scans 30 preset FM stations, stops when it
finds a station broadcasting the type of program you
selected, and tunes in to that station.
• When a program is found, "FOUND" appears on the
display and selected station is shown.
• If no program is found, "NOT FOUND" appears on the
display.
• To stop searching, press PTY SEARCH.
To continue searching after it stops on an unwanted
station
Press PTY SEARCH again.
Remote
ONLY
16