Remote control
TUNING/
GROUP/PTY
K,5
DISPLAY
MODE
Receiving FM Stations with
Radio Data System
Radio Data System allows FM stations to send an additional
signal along with their regular program signals.
• When the System tuned to the FM station which provides
the Radio Data System service, the RDS indicator lights
up.
With this System, you can receive the following types of
Radio Data System signals.
PS (Program Service)
PTY (Program Type)
RT (Radio Text)
Enhanced Other
Networks
13
Advanced Radio Operations
PTY
SEARCH
NEWS/INFO
Remote
ONLY
Shows commonly known
station names.
Shows types of broadcast
programs.
Shows text messages the
station sends.
Provides the information
about the types of the
programs broadcast by the
Radio Data System stations of
the different networks.
To show the Radio Data System information
While listening to the FM station...
DISPLAY
MODE
Station Frequency
PS
Station names is displayed. "NO PS" will
appear if no signal is sent.
PTY
The broadcast program type is displayed. "NO
PTY" will appear if no signal is sent.
RT
Text messages the station sends is displayed.
"NO RT" will appear if no signal is sent.
Searching for a Program by
PTY Codes
Remote
ONLY
You can locate a particular kind of program from the preset
stations (see page 8) by specifying the PTY codes.
To search for a program using the PTY codes
1
While listening to the FM station...
6; 5-)4+0
2
Select a PTY code.
UNING/GROUP/P Y
See Additional Information about PTY codes (See
page 23).
PS
PTY
RT