JVC UX-DM9DB Instructions Manual page 45

4 Set the start time and end time of the selected timer.
• Adjust the start hour, the start minute, the end hour,
then the end minute.
5 Select "ONCE" or "WEEKLY."
Recording Timer works once.
ONCE
Recording Timer works weekly or every
WEEKLY
day.
6
Display the week setting screen.
7 Set the desired day of the week.
• When "ONCE" is selected:
The recording timer works on the
Sun, Mon,
selected day.
Tue, Wed,
Thu, Fri, Sat
• When "WEEKLY" is selected:
Recording Timer works on the
Sun, Mon,
selected day every week.
Tue, Wed,
Thu, Fri, Sat
Recording Timer works from Monday
Mon-Fri
to Friday.
Recording Timer works from Monday
Mon-Sat
to Saturday.
Recording Timer works every day.
Everyday
8
Select "REC TIMER."
41
9 Select a source to record.
• When you want to record the radio broadcast:
Select the preset number of the desired station or
service.
• You can also use the number buttons to select the
preset number.
10
If the setting is done while the System is turned on,
turn off the System.
To set Recording Mode
Set the Recording Mode before or after setting Recording
Timer.
• See page 27 for the details of each mode.
SP REC
About group of the built-in memory
When Recording Timer works, a group named "TIMER" is
made automatically and the recordings are stored as tracks in
the group.
• You cannot select other groups for storage.
To cancel Recording Timer
In step 2 on page 40, select the timer number you want to
cancel, then press CANCEL.
• Even when you cancel Recording Timer, the setting
remains stored.
To activate Recording Timer again
In step 2 on page 40, select the timer number you want to
activate, then press ENTER. The settings appear on the
display. After you confirm it, turn off the unit.
HQ REC
EP REC